It is always a good idea to do your research before hiring a plumber to come and do work in your home. Some plumbers just don’t know how to handle certain tasks which could make the problem worse. Always look at plumber reviews, or ask friends and family if they can recommend one.
Plumbing should only be done by professionals if there is a major problem or if you do not understand plumbing. Many of the big problems that plumbers deal with, actually have simple solutions. The average person, who does not understand the intricacies of plumbing, usually end up compounding the problem by causing other costly damage to the house during the failed repair. The plumber will need to be called in the end, anyway.
Before starting a plumbing project be sure to know your pipes. Each pipe has a different use and every municipality has different codes for what pipes can be used for. Making a mistake in this area can be very costly, if you are forced to remove all the pipes from the work you have just completed.
If you have a plumbing nightmare and your house gets flooded, avoid using heat and heat lamps to dry the property out. Let it dry naturally if you can because the additional heat can cause problems. When building materials dry too fast, they can warp and crack causing more damage than just the water.
Hiring a plumber can be an expensive endeavor, and it may be unnecessary. Simple problems like clogged drains can be fixed at home without hiring a professional. Remember the tips in this article if you are having trouble with a sink or toilet overflowing or you need to clear a drain.
Prevent Clogged Drains
Clogged drains are a problem for several people, as substances like food particles, hair, and other blockage can make a sink or toilet overflow. With a little prevention and purchasing a product like Dran-O, you can try plumbing by yourself. Read this article for some tips on how to do plumbing yourself.
You should never dump grease, fat, or cooking oil down the drain. These fats and oils could solidify in cold pipes and clog your sink. Instead you should put the fats and oils in a dish and wait for it to solidify, then throw it away for garbage men to pick it up.
If water is backing up into multiple fixtures all over the house, it is no longer going to be effective for you to use chemicals or a small hand snake. This is evidence of a blockage in the main line, and you must contact a professional to take care of this problem for you.
You always want to solder correctly, the biggest mistake most people make when soldering is failing to get the interior of the fitting and the exterior of the pipe clean and shiny. Polish these surfaces with a fine emery clot until bright. When soldering, never heat the pipe, but instead heat the fitting. Doing so allows the solder to be drawn into the fitting by capillary action.
Avoid Frozen Pipes
Avoid frozen pipes this winter! Keep a small trickle of water dripping from faucets, and wrap your uninsulated pipes with foam or newspaper. If possible, keep the doors open between unheated and heated rooms. In an unheated area such as a garage or laundry room, keep a small heater next to the pipes. Remember to do this before the first cold snap hits.
Make sure that you disconnect all hoses outside your house when the fall season hits. This is important to reduce the chance of freezing, which can cause damage to the connecting pipes. Disconnect all of your water hoses and store them safely to put your family in the best position for the fall.
To help you repair a leaky water line, you should hire a plumber. A leaky water line can be a problem because it could lead to a flood. The best way to fix this problem is to hire a licensed plumber who is trained to repair the leak.
Do not let your faucet leak. Did you know a leaky faucet can waste about 150 gallons of water every day? If you have a leak, never ignore it. It could be coming from the faucet or the pipes. Continually check pipes and faucets for extra moisture or small leaks.
Bathroom Do’s and Don’ts
You can remove unsightly mineral buildup from your shower head by soaking it in vinegar overnight. This loosens the deposits, and in the morning you only need to wipe off the residue with a rag. If your shower head is high up an not removable, place vinegar in a plastic bag, slip the bag over the shower head and hold in place with a twist tie.