You Asked a Fort McMurray Plumber and We Answered!
How does a plumber in Fort McMurray fix all your plumbing challenges? Especially when plumbing has so many possibilities as to what you can use, do. We are experienced plumbing professionals, so we can handle just about any challenge you send our way. We always like to answer our clients questions so they have a better understanding of pluming in their home. So, if you’re curious to learn more, just keep on reading this article. Many of our clients ask us the same questions (especially when it comes to DIY plumbing jobs), so we have listed (and answered) all the things you want to know. If you have more questions for us, please contact us.
What is the Right Way to Solder?
Curious about soldering? You’re not the only one. As a plumber in Fort McMurray, we know just how important it is to solder correctly — especially when you tackle this job yourself. The biggest mistake most people make when soldering is failing to get the interior of the fitting and the exterior of the pipe clean and shiny. Polish these surfaces with a fine emery clot until bright. When soldering, never heat the pipe, but instead heat the fitting. Doing so allows the solder to be drawn into the fitting by capillary action.
How Do I Prevent My Pipes From Freezing?
Want to avoid frozen pipes this winter? Keep a small trickle of water dripping from faucets, and wrap your uninsulated pipes with foam or newspaper. If possible, keep the doors open between unheated and heated rooms. In an unheated area such as a garage or laundry room, keep a small heater next to the pipes. Remember to do this before the first cold snap hits.
During the winter, preventing frozen pipes when you live in a small dwelling can be something good to know. Frozen pipes will not only stop your flow of water but can crack and damage pipes. By running a little water out of every faucet during the coldest parts of the day, you can avoid this.
How Do I Winterize a House?
To winterize a house that will sit unused during the winter months, you must completely drain all of the pipes. After turning off the main water supply, let all of the water drain from the faucets, toilets, and water heater (turn off the gas). Add a quart of antifreeze to sinks and the tub to prevent water from freezing in the drain trap.
Do I Have To Call a Plumber in Fort McMurray When I See a Damaged Section of Pipe?
It is not always necessary to call a Fort McMurray plumber when you have a damaged section of pipe. There are repair kits you can buy in your local hardware store which are excellent in repairing leaks. If you have a small leak, you can rub a compound stick over the hole or crack in the pipe to seal it shut. Epoxy paste is also an excellent remedy for a leaking pipes. Make sure you turn off the water and completely dry the pipe before applying the epoxy.
How Can I Save Money On My Energy Bill?
Installing more efficient shower heads can save you tons of money on your energy bill. Most of the hot water we use is from showering. If you spend several extra dollars putting in energy-saving shower heads, you can potentially reduce your energy bill significantly for every shower head used in your home.
Another great way to save a few dollars is to add insulation to your hot water heater. Much of the energy required to heat the water in your home is the expense from keeping the water in the tank hot for when it is needed. Adding an extra layer of insulation can help reduce this cost.
Why Is My Plumbing Making Strange Noises?
If your plumbing is making strange noises you may have lost something called your “air cushion”. To turn this back on, you’re going to need to turn off your main water supply. Then you need to run all faucets in your house and then turn back on your main water supply. This should make everything sound better again. Phew!
How Much Does a Plumber in Fort McMurray Cost?
We know the bill after a visit from the plumber can be a tad expensive. While it may seem like a breeze to fix a toilet or other drainage problem, therefore the price should be low. You must remember that not only does a plumber have to charge for labor, but they have to charge for parts that you need. As much as we would love to do the work for less – all our expenses add up. We do our best to ensure our prices are fair. Please contact us for a free quote.
How Can I Prevent a Plumbing Issue While on Vacation?
When you’re going away on a vacation, you should consider shutting off the water supply to your home. This can help stop many problems before they start. If you don’t do this, you should have someone stop by your house regularly to check that nothing has gone wrong and that your home isn’t flooded.
If you cannot turn off your main water valve before leaving on vacation, turn off the individual valves for the toilets, sinks, and washing machine. If the valves do not look like they are in good working order, then leave them on and that will be something that you need to have changed when you return.
What is the Most Important Plumbing Tip I Should Remember?
The most important plumbing tip you need to know is — how to turn off your home’s main water supply. Once the water is shut off, you can investigate problems and figure out how to resolve them. Walk the family through the house and show them where all the water shut-off valves are, and how to use them.
How Can I Prevent Plumbing Issues in the Laundry Room?
When you are going to do laundry in your home washing machine, do not use excess detergent, bleach or other chemicals. Too many of these products can cause the natural bacteria in your septic system to be killed. Just use enough of these products in order to get your laundry done.
How Can I Install a Water Heater Properly?
When doing the install on a water heater, keep an eye out for unconnected pipes. A commonly missed pipe is the one that leads out from the area for drainage. It is most likely a recirculation pipe, which really goes a long way to help your water stay heated without wasting as much water in the process.
I Need a Plumber in Fort McMurray to HELP!
Sometimes in the case of minor and or major emergencies we all have to become Mr. Fix it ourselves. If you’ve got blockage in your drains the first step is to try a commercial de-clogger like Drano. Simply pour it down the drain, wait ten minutes, and presto, your drain should be clear.
Doing your own plumbing might not be a ton of fun, but sometimes it’s necessary. As you read, there are a lot of ways this can be done and no two techniques or equipment will yield the same results. There are also lots of customization options that can work with your home and budget.